50 N adjustable test hook

Used for securely holding smaller crimp terminals for tests to BSI spec. BS 5G 178 Part 1 and equivalent international standards.

5 kN wedge grip

This wedge grip is ideal for gripping terminal blades. As load is applied, the wedge action of the jaws ensures the sample is held rigidly without slippage. Max. jaw capacity 8 mm.

1 kN cable cam grip

For holding insulated cables and wire to 5 mm diameter. The sample is secured by the cam, which self-tightens as load is applied and spreads the load evenly.

1 kN rotating crimp receptacle

A versatile crimp termination holder that accommodates a wide range of terminals. The inner slotted ring rotates to adjust to fit 8 cable diameters, 1.5 to 5 mm. Used for BS 5G 178-1 and equivalent international standard test methods.

WTST-dV 2.5 kN Pull Tester

Our entry-level Wire Terminal Strength Tester (WTST-dV 2.5 kN) provides a cost-effective solution for performing pull-out tests on crimped, soldered or ultrasonically-welded joints.

International test standards generally stipulate that terminals must be pulled to destruction at a uniform pull speed of between 25 to 50 mm/min, which requires the use of a motorised test system.

The WTST-dV 2.5 kN ensures that these requirements are met, providing high accuracy with repeatability and reliability of results.